现在位置:首页 » 论文 »

CASE STUDY OF SHAKEDOWN EVALUATION OF A SHELL WITH NOZZLE BASED ON ELASTIC-PLASTIC ANALYSIS

作者:Kenny Shen ⁄ 时间:2017年04月16日 ⁄ 分类: 论文 评论:0  Abstract

In the past, shakedown evaluation was usually based on the elastic method that the sum of the primary and secondary stress should be limited to 3Sm or the simplified elastic-plastic analysis method. The elastic method is just an approximate analysis, and the rigorous evaluation of shakedown normally requires an elastic-plastic analysis. In this paper, using an elastic perfectly plastic material model, the shakedown analysis was performed by a series of elastic-plastic analyses. Taking a shell with a nozzle subjected to parameterized temperature loads as an example, the impact of temperature change on the shakedown load was discussed and the shakedown loads of this structure at different temperature change rates were also obtained. This study can provide helpful references for engineering design.

KEY WORDS: shakedown, ratcheting, elastic-plastic analysis, pressure vessel, FEA

捕获.JPG

 

本文由Kenny Shen原创或编辑,转载请保留链接【CASE STUDY OF SHAKEDOWN EVALUATION OF A SHELL WITH NOZZLE BASED ON ELASTIC-PLASTIC ANALYSIS】http://kennyshen.com/?post=77 上一篇: 【ASME PVP 2017】 PVP 2017 会议概况
下一篇:全球首次在ANSYS Workbench下实现ASME Code Case 2605蠕变疲劳分析并验证
目前有 0 条评论